Had it with trying to figure out complicated light fixtures? Get a keyless lampholder and take the switches out of the picture. You can now

Are you struggling with complicated light fixtures? Get a keyless lampholder and remove the switches. You can now use wall controls. A keyless lampholder is

Replacing a lamp holder can be a bit of a pain, especially with all of the wires and in older fixtures. But if you follow

Changing or installing GU10 lamp holder leads can be a little tricky because of the wires and connectors. To install or replace GU10 lamp holder

Taking wires out of a lamp holder can be tricky if you do it wrong. Doing it wrong can lead to damage and safety issues.

An improper connection of a lamp holder could cause an electrical hazard or a malfunction. Learn how to make the correct connection. To wire a

If you don’t attach the wires to an E27 T210 lamp holder correctly, you might have a fire or your lamp holder might not work.

Wiring an E27 lamp holder can be confusing and dangerous if you don’t know what you’re doing. Follow these steps to make sure you install

People have problems trying to make bulbs work between countries like India and the USA. This can lead to bad lighting performance or electrical hazards.

Improperly open, wire, or close this E27 lamp holder and you could have an electrical hazard or it might not work. Be careful with each

Dealing with a ground wire when you don’t need it in a lamp holder can be confusing and potentially dangerous. However, it’s important to safely

  Many light bulb holders don’t have ground terminals, which causes people to worry about the safety and operation of these fixtures. Here’s why and