Light bulb fittings plastic lamp holder E26 & E27:
Light bulb fittings or lamp holders are used for low voltage circuits such as electricity experiments, educational activities and for science projects.
This lamp holder features a rolled shell of brass mounted in a plastic base with two screw terminals and two pre-drilled holes for mounting on a project board.
The base diameter is 29 mm and the height is 17mm. It holds our 1.2-volt, 2.25-volt, 5.1-volt and other E10 light bulbs. It has the CE* t180 approval marking and 12 V, 2 A rating.
Light Bulb Base and Light bulb fittings Shape Types
B Bayonet Collar Base
E Edison Screw Light Base
F Single Pin Type Base
G Multiple Pin Type Light Bulb Base
K Cable Connections
P Pre-focused Light Base
R Recessed Contact(s) Base
S Shell-type Light Bulb Base
T Telephone Slide Base
W Wedge Base
X Special Type Lightbulb Base.
A plastic lamp holder E26 & E27 is a socket used for connecting light bulbs to an electrical power source. E26 and E27 are standard sizes for screw-in bulb bases in North America and Europe, respectively.
Easy to use and allows you to keep using conventional light bulbs or compact fluorescents with This Lamp Socket. This Bulb Lamp Socket is easy and conveient for you to use or install. Feature compact and simple design, instead of the tiny candelabra-based bulb.
These Light bulb fittings shells are thick black plastic and are typically found in less expensive lighting where the sockets are hidden by the lamp body.
Light bulb fittings plastic light sockets E26 & E27, all call plastic lamp holders.
The lamp is generally divided into a plastic head, Phenolic socket, ceramic light socket, brass lamp holder.
The plastic head is generally made by the injection molding machine with mold injection molded of its raw materials can be divided into the PET, PBT, LCP.
According to the lamp bayonet bit different, plastic lamp holder can be divided into E14 E27 E12 E26, daily life, the common base E14 E27.
Plastic head resistant to high temperature, generally higher than for other types of caps can be achieved for more than 240 degrees.
FAQ:
What is the material of the plastic lamp holder?
A: The plastic lamp holder is made of thermoplastic material such as polycarbonate or nylon.
Can I use an E26 lamp in an E27 light socket?
A: Yes, you can use an E26 lamp in an E27 light socket with an adapter.
Is the plastic lamp holder suitable for outdoor use?
A: It depends on the specific model and rating. Some plastic lamp holders are rated for outdoor use, while others are only suitable for indoor use.
What is the voltage rating for E26 and E27 light sockets?
A: The voltage rating for E26 and E27 light sockets is usually 120-250V.
Can I use a dimmer switch with a plastic lamp holder?
A: Yes, you can use a dimmer switch with a plastic lamp holder, but you need to choose a dimmable bulb and make sure the dimmer switch is compatible with the bulb and the lamp holder.
What is the thread size for E26 and E27 lamp holders?
A: The thread size for E26 and E27 lamp holders is 26mm and 27mm, respectively.
How do I install a plastic light socket?
A: To install a plastic light socket, you need to connect the wires to the terminal screws and secure the holder to the fixture or surface.
Can I use a plastic lamp holder for LED bulbs?
A: Yes, you can use a plastic lamp holder for LED bulbs, but you need to choose a compatible bulb and make sure the holder is rated for the same wattage and voltage as the bulb.
What is the temperature rating for plastic light sockets?
A: The temperature rating for plastic light sockets is usually -40°C to 120°C.
What is the difference between E26 and E27 light sockets?
A: The main difference between E26 and E27 light sockets is the thread size, with E27 being slightly larger than E26
