G24q GX24q 4 needle Plug in lamp holder sockets

G24 4pin plug in compact fluorescent light sockets

G24q GX24q four needle Plug in lamp holders with threaded barrel

Snap in fixing, Screw fixing vertically,
threaded barrel
PBT body, Phosphor bronze contacts,
stainless spring
Weight.20g,
Package.100pcs
Rated temperature: T140
Push wire terminals 2 holes: 0.5-1 mm2/18 AWG

A GX24q lamp holder with threaded barrel is a type of socket that is designed to fit GX24q bulbs with a threaded barrel base. It is commonly used in lighting fixtures.

The compact fluorescent lamps (CFL) are a type of bulb which is commonly known for its efficiency for using less power than other commonly used bulbs, while still emitting the same amount of lighting.

CFLs have been designed in order to replace the incandescent lamp and can fit into most existing lighting fixtures that may have previously been used for incandescent bulbs.

When you compare the two (CLS and Incandescent) the incentive to use CLS shows due to the lower power usage for the amount of light emitted and its longer life span.

Although the CLS bulbs are usually more expensive, in the long run they are also more cost-effective too.

FAQ:

Can I use an LED bulb with a GX24q lamp holder?
Answer: Yes, as long as the LED bulb is compatible with the wattage and voltage of the holder.

Is it safe to use a GX24q light socket in a bathroom or outdoor setting?
Answer: The socket should be rated for the intended environment. Check the product specifications for the socket’s IP rating.

Can I use a GX24q lamp holder with a dimmer switch?
Answer: Yes, but make sure the holder and the bulb are both compatible with the dimmer switch.

Can I use a GX24q light socket with a halogen bulb?
Answer: Yes, as long as the socket is compatible with the bulb’s wattage and voltage.

Can I use a GX24q light socket with a lampshade?
Answer: Yes, as long as the lampshade is compatible with the size of the bulb and the socket.

Can I use a GX24q light socket with a pendant light?
Answer: Yes, as long as the pendant light is compatible with the size of the bulb and the socket.

Can I use a GX24q lamp holder with a chandelier?
Answer: Yes, as long as the chandelier is compatible with the size of the bulb and the holder.