E14-S02 push in terminal Bakelite lamp socket
Serie: E14 Lamp holder (Europe standard)
Rated:2A,250V, T210.
Colour: White, Black, The rice of yellow, Transparent, Any colour.
Cable section: 0.5mm²-1.5mm²
Terminal: Push in terminal.
Components: 1 Smooth Skirt, 1 Cap with threaded plastic entry M10×1. (Total 2 Parts).
E14 push in terminal Bakelite light sockets are a type of lamp holder designed to accommodate E14 bulbs, which are commonly used in lighting fixtures in Europe and Asia.
The sockets have two metal contacts that securely hold the bulb in place and allow electricity to flow through it.
FAQ:
What is the voltage rating of E14 lamp sockets?
Answer: Most E14 lamp sockets are rated for 220-240 volts.
Can E14 lamp holders be used with LED bulbs?
Answer: Yes, E14 lamp holders are compatible with a wide range of LED bulbs.
What is the maximum wattage that E14 lamp sockets can handle?
Answer: The maximum wattage for E14 lamp sockets varies, but it is typically around 40-60 watts.
Are E14 lamp sockets suitable for outdoor use?
Answer: It depends on the specific socket and its IP rating. Some E14 lamp sockets are suitable for outdoor use, while others are not.
What materials are E14 lamp sockets made from?
Answer: E14 lamp sockets can be made from a variety of materials, including Bakelite, ceramic, and plastic.
Are E14 lamp holders compatible with dimmer switches?
Answer: Yes, E14 lamp holders can be used with dimmer switches, but you should make sure that the bulbs you are using are also dimmable.
What is the difference between E14 and E27 lamp sockets?
Answer: E14 lamp sockets are smaller than E27 lamp sockets and are typically used for smaller bulbs.
What is the standard size for E14 lamp holders?
Answer: The standard size for E14 lamp holders is approximately 14mm in diameter.
How do you install an E14 lamp socket?
Answer: E14 lamp sockets can be installed by pushing the wires through the openings on the bottom and securing them with screws.
Can E14 lamp holders be used with halogen bulbs?
Answer: Yes, E14 lamp holders are compatible with halogen bulbs.
