Porcelain Light socket with cord for LED & halogen lamps
Name: G5.3/mr16 lamp holder
Rating: 250V 100W
Voltage & Current:25V 4A
Silicone wave or Teflon wire :2X15cmX0.5mm2
Material: Porcelain body, metal fitting
Usage: For the lighting accessories.
Standard porcelain G5.3 halogen Light socket with heat resistant flying cord
Approximately 300mm long
12mm spacing between each fixing hole
Can be used with standard low voltage MR16 downlighters.
It comes with 12v connector block.
Porcelain MR16 GY6.35 LED halogen Light socket with cord 12V Low Voltage Lamp holder – Wire Connector Sockets for Lamp Light Recessed Downlights
Light socket with cord specifications:
1.Color: More than 7 color
2.Material: plastic, Bakelite, porcelain
A MR16 GY6.35 LED halogen light socket with cord is a lamp holder used to connect an MR16 halogen or LED bulb to a power source via a 15cm cord.
Halogen Light socket with cord wire selection 0.5m2 braided wire 15CM
0.3m2 silicon rubber wire 15CM
0.5m2 silicon rubber wire 15CM
0.75m2 silicon rubber wire 15CM
0.3m2 silicon rubber braided wire 15CM
0.5m2 silicon rubber braided wire 15CM
0.75m2 silicon rubber braided wire 15CM.
JAMES offers a wide range of 12 volt led MR16 GY6.35 LED halogen Light socket with cord. These low voltage lighting solutions all run on 12VDC. LED 12v products can operate on two different types of current: Alternating Current (12VAC LED) and Direct Current (12VDC LED).
Not all products operate on both. LED track lighting, often using LED light bulbs with MR16 and MR11 bases also can operate on 12 volts to 24-volt system. We also offer 12V LED G4 bi-pin lights and 12-volt LED strip lights and 12v LED cover lights.
Can I use an LED bulb with the MR16 halogen light socket?
Answer: Yes, as long as the LED bulb is compatible with the socket.
Is the MR16 halogen lamp holder compatible with dimmer switches?
Answer: Yes, the socket is compatible with most dimmer switches.
What is the material of the MR16 halogen lamp holder?
Answer: The body is typically made of ceramic, and the contacts are typically made of brass.
What is the voltage rating of the MR16 halogen lamp holder?
Answer: The voltage rating can vary, but it is typically around 12V.
How do I install the MR16 halogen light socket?
Answer: Simply connect the cord to the socket and then insert the bulb into the socket.
Can the MR16 halogen light socket be used in outdoor applications?
Answer: It depends on the socket, so check the specifications before use.